Mazatapec magic mushroom

Buy Mazatapec magic mushroom Online – for sale

Buy Mazatapec magic mushroom Online known as the Mazatec, has a long and revered history with this mushroom. For many generations, they connected to nature and promoted spiritual healing by using this sacred mushroom in ceremonial rituals. The “seeking the magic mushroom” article, which appeared in Life magazine

Psilocybe cubensis Mazatapec magic mushrooms have large dark brown caps and yellow-brown stems, the caps stay partially closed. You should expect your first flush within one to three weeks.

Yield: Depends on the magic mushroom strain, growing conditions, proper care, and maintenance.

• 600 ml: 150-300 grams
• 1200 ml: 400-800 grams
• 2100 ml: 600-1500 grams

Content

• 100% mycelium psilocybe cubensis magic mushroom grow kit
• Plastic bag with built-in air filter
• Paper clip

You’ll need

• Spray bottle for misting
• Water
• Clean environment
• Clean hands and arms

Psilocybe Cubensis 100% Mycelium Grow Kit Instructions

1. Open the package carefully, don’t use a knife, you could ruin the plastic bag. Do not touch the (white) air filter on the plastic bag to avoid contamination.
2. Close the plastic bag by folding the top 3 cm down, and use the paper clip to keep it closed.
3. The optimal temperature is between 18 and 28 degrees Celsius (64.4 and 82.4 degrees Fahrenheit). Lower or higher temperatures may slightly delay the growth process. Temperatures above 35°C are harmful. Special mushroom heat mats are available for purchase if you don’t live in (sub-)tropical areas.
4. Rinse the lid under running water, dry and store it properly.
5. Do not spray directly onto the kit! Repeat this step every other day. Close the bag after each spraying.
6. Too much moisture is not good.
7. These grow kits produce several flushes. After the first harvest, remove the grow kit from the plastic bag. Fill the kit with clean, cold tap water. It breathes new life into the mycelium and ensures that enough moisture is present for the mushrooms to grow.
8. Place the lid of the grow kit back onto the kit. Let the kit soak for 12 hours. Lift a corner of the lid and drain the excess water. From here you can follow the instructions starting from step 3.